A planning guide from Toronto Windows & Doors Co. How our guides are prepared
The essentialsChoose an entrance assembly that works at the landing
Entry door installation should solve the entrance problem as a complete assembly. Begin with the reason for the change: a damaged frame, difficult closing, a different glass arrangement or a preference for easier everyday access. A slab-only change and a prehung door-and-frame assembly need different compatibility checks, so ask which option the actual entrance supports. On a Toronto property, review swing direction against the landing, steps, interior furniture and any retained storm door before selecting the unit. Specify glazing, seals, locks and hardware together; a desired smart lock or closer can affect the product preparation and separate setup responsibility. The proposal should name what happens at the sill, sidelights, interior casing and exterior trim, including any concealed damage found during removal. Enlarging an opening introduces its own design and approval questions and should not be assumed part of fitting. Compare the complete installed boundary and operation rather than relying on a catalogue photograph or a general security promise.
Define the entry slab, frame, sill and hardware work
- Existing entrance and frame assessment
- Door, frame and hardware schedule
- Threshold and weather-interface planning
- Sidelight, transom and trim boundaries
- Operation and finishing requirements
Door swing, glazing and lock-preparation decisions
Slab, frame and threshold condition
Assess the frame and sill as well as the moving door. A sticking slab may relate to hinges, frame movement or surrounding deterioration, and a new slab does not resolve every cause. Review whether retaining the frame is practical and how compatibility will be verified. At the threshold, consider weather exposure, landing levels and ordinary foot traffic rather than choosing a profile solely for appearance.
Swing, glass and hardware choices
Confirm swing direction and the space needed inside and outside. Handles, locks, closers and smart hardware need coordination with door preparation and intended use. Sidelights and glass options affect privacy, light and the appearance of the whole entry. Compare the exact assembly supplied; a photograph of a similar style does not establish dimensions, performance or included hardware, or show how it will work with the existing landing.
Surrounding finishes and temporary access
Removal can affect paint, plaster, casing and exterior trim. Identify retained finishes and who restores each disturbed area. Plan how occupants enter while the opening is being worked on and how floors and walls are protected. If a screen or storm door is to remain, check compatibility early. It may need adjustment or separate replacement rather than automatically fitting the new entrance.
From entrance symptoms to an agreed door assembly
Assess the complete entrance assembly
Provide photographs from both sides, symptom history and intended changes. Include concerns at the sill, sidelights or surrounding wall. The assessment should verify dimensions, handing and retained components. Record any need for opening alteration or specialist review before ordering, and distinguish a hardware repair option from replacing the complete door and frame. Discuss temporary entry arrangements if this is the only practical entrance.
Finalize the door and finishing schedule
Approve the model, glazing, hardware preparation, finish and swing before manufacture or supply. Define final measurement responsibility, removal, disposal and weather protection. Check approval questions for changes to the opening. Agree who handles paint or stain, alarm contacts and surrounding repairs, and how concealed deterioration revealed during removal will be documented before additional work extends the agreed scope or delays the installation.
Review fit, operation and care
Walk through opening, closing and locking with the installer and review threshold and trim work. Retain care instructions for the finish, glazing, seals and hardware. Record outstanding coating or adjacent-surface work and its timing under product guidance. Ask how future adjustments should be reported without treating a smooth demonstration at handover as a guarantee against all later building movement or wear in the entrance assembly.
Questions before ordering an entry door
Can a new door slab fit the existing frame?
Possibly, but dimensions, hinge positions, hardware preparation and frame condition need verification. A nominal door size alone does not establish compatibility with the existing entrance assembly.
Are painting and staining included?
Only when stated. Some products require a specific finish or maintenance routine, while others arrive prefinished. Identify the finishing responsibility and timing in the proposal rather than leaving the new door unprotected by assumption.
Can the existing storm door remain?
Its size, attachment and clearance need checking against the new assembly. Do not assume it will transfer unchanged. Ask whether adjustment, reinstallation or replacement is included and whether the entry product has relevant compatibility guidance.
Should smart locks be chosen before ordering the door?
Yes. Door preparation, lock dimensions and desired operation should be coordinated. Confirm who supplies and fits hardware, and assign separate setup tasks so the entrance is delivered with an agreed working arrangement.
Should the landing be measured before choosing the door swing?
Yes. Review the route people use, steps, furniture and any storm door with the proposed swing and hardware. A door can fit the opening yet create awkward access when it is open. Ask for those clearances and the threshold connection to be considered before the configuration is authorized for ordering.
Entry door performance and Toronto alteration resources
Check current requirements with the relevant authority for your property and scope.
- Windows, doors and skylights: energy efficiency ↗Natural Resources Canada
- When do I need a building permit? ↗City of Toronto
Planning guide updated . Scope and site conditions need individual assessment.

